Copper concentrate calcine cooling
KGHM's Głogów smelter's copper concentrate cooling drum was delivered to Poland in 2016. The cooling drum is fed with 20 t/h of concentrate at a temperature of approximately 450°C. The drum cools the material down to approximately 130°C.
Reference details
-
Industry sectorMetals & Minerals
-
LocationPoland
What was included in the package?
Cooling
Thanks to our cooling solutions, you can process even the hottest and most abrasive materials safely and efficiently. Hot materials may require cooling for several reasons: subsequent process stages do not...
Cooling drums
The Kopar cooling drum is an ideal solution for the efficient cooling of large quantities of material. It is well-suited for hot and abrasive materials. The rapid cooling of the material is independent of particle size,...
Discover our other projects too
Solid carbon handling in a hydrogen production plant
We delivered equipment for the safe handling of solid carbon to Europe's largest hydrogen production plant based on methane pyrolysis.
Bed sand drying
In 2015, we supplied a sand dryer for a power plant located in the Indonesian rainforest for the first time. The drying takes place in a rotating drum with a diameter of 1600mm, into which the wet sand is fed. The drying energy is generated by an oil burner. The dryer has a length of 5000mm and a capacity of 5 m³/h.
Cooling Equipment for anhydrite in a hydrofluoric acid production plant
In a chemical industry production facility located in Southeast Asia, a reliable solution was needed for the treatment of process side streams. Kopar supplied cooling technology for the project, which supports safe material handling, process stability, and sustainable production under demanding operating conditions.
Bottom ash cooling
KRC coolers, specifically designed for cooling large bottom ash volumes, have been operating at this Polish power plant since 2018.