2.11.2026

How does the quality of cooling water affect the system’s operation in practice?

The quality of cooling water is one of the factors that affect the operation of industrial cooling systems on a daily basis, but which are often not addressed until problems arise. Poor water quality can cause corrosion, deposits, and biological growth, which reduce heat transfer, increase energy consumption, and shorten equipment lifespan. In this guide, we go through the concrete steps to assess, repair, and maintain the quality of cooling water in your industrial processes.

The quality of cooling water in industry is not just a technical detail; it directly affects the reliability and costs of the process. Whether you are dealing with the cooling of hot metallurgical materials, waste, or other demanding bulk materials, the same basic principles apply. If you want to learn about what types of cooling systems are available for your specific application, contact us today. cooling solutions for demanding environments It is available; you can find more information on our website.

Identify the quality requirements for cooling water

Before measuring or repairing anything, you need to know what you are aiming for. The requirements for cooling water vary depending on the type of system, materials, and process conditions. Open cooling towers, closed circulation circuits, and direct water cooling all impose different requirements on the water quality.

Identify the most important parameters for your system. The most common parameters to monitor are:

  • pH value: Too acidic or alkaline water accelerates corrosion or causes deposits
  • Hardness: High calcium content leads to scale build-up on heat transfer surfaces
  • Electrical conductivity: Indicates the total amount of dissolved salts
  • Chlorine content: High concentration of chlorides accelerates the corrosion of stainless steel
  • Biological load: Bacteria and algae can clog pipes and impair heat transfer
  • Adhesive content: The particles wear out the pumps and clog the switches

Compare these parameters with the recommendations and standards of device manufacturers, such as VDI 3803 or ASHRAE 188, which provide reference values for different system types. Once you know the target values, you can proceed to assess the current situation.

Estimate the current cooling water condition by measuring

Measurement is the only way to obtain a reliable picture of the true quality of cooling water. A subjective assessment is not enough, as many problems, such as microbiological growth or dissolved metals, are not visible to the naked eye. Start with systematic sampling.

  1. Take water samples from different parts of the system: inlet water, return water, and any problem areas, such as heat exchangers or the suction ports of the pumps
  2. Measure pH, electrical conductivity and temperature directly in the field using rapid meters, as these values may change after sampling
  3. Send the samples to the laboratory for chloride, hardness, contaminant content and microbiological analysis
  4. Document the results and compare them with previous measurements and the target values you set
  5. Simultaneously check the pipes, heat transfer surfaces and pumps visually for deposits, corrosion or unusual wear and tear

Based on the measurement results, you have a clear picture of which parameters are within the target values and which require action. For example, if the electrical conductivity is clearly elevated, it indicates the accumulation of dissolved salts, which can be managed by flushing or a water treatment program. Contact an expert if the measurement results are difficult to interpret or if the deviations are large. Our experts are happy to help.

Corrects detected deviations through water treatment

Once you know where the problems are, you can choose the right corrective measures. Water treatment is not just about adding chemicals; it is a holistic approach that encompasses physical, chemical, and biological methods. Choose the measures based on the observed deviations.

Control of the thickness and hardness of the layers

If the hardness analysis shows a high calcium content, consider softening with ion exchange or by dosing with anti-scale chemicals. Scale deposits on heat transfer surfaces can significantly reduce cooling efficiency, and cleaning the accumulated surface is significantly more expensive than prevention.

Controlling corrosion

Adjust the pH to the target range, typically between 7.0 and 8.5, with buffering chemicals. High chloride concentrations require either water replacement or a review of material choices. The dosing of corrosion inhibitors in closed-loop circuits is a common and effective way to protect pipelines and equipment.

Prevention of biological growth

Microbiological growth, especially the risk of Legionella bacteria in open systems, requires regular biocide treatment. The measures are:

  1. Choose a biocide that is suitable for the materials and process conditions of your system
  2. Administer the bioside according to the planned schedule, not just when problems arise.
  3. Check the biocidal content regularly with field measurements
  4. Rinse the system if necessary if the biological load has been high.

After the corrective measures, wait for a sufficient period, usually 1 week to 4 weeks, and take a new water sample. Compare the results to the target values to ensure that the measures have produced the desired result. If you are unsure about the correct chemicals or the dosage amount, Get in touch to a water treatment expert.

Ensure the system’s operation through regular monitoring

A one-time correction is not sufficient, as the quality of cooling water continuously changes as a result of process conditions, outdoor temperature, and evaporation. Systematic monitoring is the only way to ensure that the water quality remains within target values in the long term.

Build a monitoring program that covers different time intervals and measurement levels:

  • Daily or weekly: pH, electrical conductivity, temperature and biocide content measured in the field
  • Monthly: A broader laboratory analysis that covers hardness, chloride content and microbiology
  • Quarterly or semi-annually: Visual inspection of heat transfer surfaces, pipelines, and evaluation of the condition of pumps
  • Annually: Comprehensive system evaluation that compares long-term trends and assesses the functionality of the water treatment program

Document all measurements and procedures systematically. With historical data, you can identify trends before they develop into problems. If the electrical conductivity rises steadily from month to month, it indicates that the flushing frequency or the quality of the water addition needs to be checked.

Monitoring should be automated whenever possible. Continuous sensors for pH, conductivity and temperature combined with alarms provide immediate information on deviations, which significantly reduces response time. This is particularly important in demanding processes where the cooling system is directly connected to the continuity of production, such as the handling of hot bulk materials.

In demanding industrial environments where cooling is required, for example hot ash or metallurgical by-products, the quality control of cooling water is part of a broader system. Kopar designs and supplies cooling solutions even in the most demanding environments, and our experience helps ensure that the entire system, the equipment, and the water treatment work together reliably. to our references and see how we have implemented cooling solutions for various industrial applications. If you want to assess the status of your own system or design a new solution, Contact our experts.

Kopar Service Manager

You have a challenge that needs solving?